THM RECYCLING MACHINES
CM Cutting Mill
Used tires
Textile
Matrazen
Cable
Used tyres
Floor coverings
| Type | CM100 |
|---|---|
| Inlet opening | Ø300mm |
| Blade cutting circle | 500mm |
| Rotor speed | 440 rpm |
| Number of blades | 10 rotor blades and 4 stator blades |
| Drive power: | 90 kW |
| Hydraulic unit | 2.2 kW |
| Dimensions | 2430 x 1900 x 2000mm (L x W x H) |
| Weight | approx. 4.5 t |
Great at cutting small
Whether aluminium, copper cables, plastics or the recycling of tyres - the CM Cutting Mill gets everything small. The CM Cutting Mill is the perfect secondary shredder for:
- Pre-shredded pipes
- Profiles
- Bumpers
- Injection moulding waste
- Punched mesh
- Copper cable
- Rubber granulate
- etc.
- Compact machine with small footprint
- Versatile due to the use of sieves with different hole diameters
- Easy adjustment of the rotor and stator blades with a gauge
- Low costs for wearing parts due to long service life of the cutting blades
- Short set-up times when changing the blades due to blade pre-adjustment
- Reliable separation of the rotor shaft from the material to be shredded
- Robust and stable: 5,5 t machine weight
[TextMaterialfraktionen]
- Sorting accuracy of aluminium and copper fractions
- Rubber , plastic granulate with grain sizes smaller than 4 mm
Technical specifications
| Type | CM100 |
|---|---|
| Inlet opening | Ø300mm |
| Blade cutting circle | 500mm |
| Rotor speed | 440 rpm |
| Number of blades | 10 rotor blades and 4 stator blades |
| Drive power: | 90 kW |
| Hydraulic unit | 2.2 kW |
| Dimensions | 2430 x 1900 x 2000mm (L x W x H) |
| Weight | approx. 4.5 t |
Areas of application
Great at cutting small
Whether aluminium, copper cables, plastics or the recycling of tyres - the CM Cutting Mill gets everything small. The CM Cutting Mill is the perfect secondary shredder for:
- Pre-shredded pipes
- Profiles
- Bumpers
- Injection moulding waste
- Punched mesh
- Copper cable
- Rubber granulate
- etc.
Advantages
- Compact machine with small footprint
- Versatile due to the use of sieves with different hole diameters
- Easy adjustment of the rotor and stator blades with a gauge
- Low costs for wearing parts due to long service life of the cutting blades
- Short set-up times when changing the blades due to blade pre-adjustment
- Reliable separation of the rotor shaft from the material to be shredded
- Robust and stable: 5,5 t machine weight
Material fractions
[TextMaterialfraktionen]
- Sorting accuracy of aluminium and copper fractions
- Rubber , plastic granulate with grain sizes smaller than 4 mm
" For fine grinding and breaking up of cables, rubber, textiles, carpets. "
Cuts the large down to size
No alternative for perfect secondary shredding
When it comes to small grain sizes, the CM Cutting Mill from THM is a giant. By means of wear-resistant rotor and cutting blades, this secondary shredder grinds the material to be ground until the granulate is of the desired size.
The user determines the fineness of the granulate by selecting a defined sieve. The granulate is collected in a trough underneath the machine and discharged pneumatically or by screw conveyor.
Technische Spezifikationen
| Type | CM100 |
|---|---|
| Inlet opening | Ø300mm |
| Blade cutting circle | 500mm |
| Rotor speed | 440 rpm |
| Number of blades | 10 rotor blades and 4 stator blades |
| Drive power: | 90 kW |
| Hydraulic unit | 2.2 kW |
| Dimensions | 2430 x 1900 x 2000mm (L x W x H) |
| Weight | approx. 4.5 t |
Einsatzbereiche
Great at cutting small
Whether aluminium, copper cables, plastics or the recycling of tyres - the CM Cutting Mill gets everything small. The CM Cutting Mill is the perfect secondary shredder for:
xyz-ips snippet=”List-Einsatzbereiche”
Vorteile
- Hohe Durchsatzleistung
- Gleichbleibende hohe Schnittqualität dank nachjustierbarer Messerblöcke
- Extra große Schwungscheibe
- Hohe Stabilität und ruhiger Lauf infolge eines hohen Maschinengewichts Hydraulischer Nachdrückeinheit, daher selbst leichtes Material problemlos zerkleinerbar
- Leicht wechselbare Verschleißteile
Materialfraktionen
- Definierte Outputgröße durch einfach zu wechselnde Siebsegmente
- Granulat und Flakes 20 – 100 mm