THM RECYCLING MACHINES
ZMK Granulator
Used tires
Textile
Matrazen
Cable
Used tyres
Electrical waste
Metal
Waste wood
Material composites
| Type | ZMK1607 | ZMK2007 |
|---|---|---|
| Inlet opening | 1550x640mm | 1940x640mm |
| Blade cutting circle | 785mm | 785mm |
| Rotor speed | 250 rpm | 165 rpm |
| Number of blades | 48 rotor blades and 8 stator blades | 60 rotor blades and 10 stator blades |
| Drive power: | 250 kW | 315 kW |
| Hydraulic unit | 7.5 kW | 7.5 kW |
| Dimensions | 4260 x 3510 x 4140mm (LxWxH) | 4260 x 3900 x 4130mm (LxWxH) |
| Weight | approx. 26,5 t | approx. 30 t |
- Cable waste
- Household/commercial and industrial bulky waste
- Electrical and electronic waste
- Pre-shredded car & HGV tyres
- Aluminiumdrehspäne, Frässpäne
- Aluminium turning , milling chips
- Metal profiles
- Oil filters
- Steel and plastic drums (pre-shredded)
- Other plastics
- Paper etc.
- High throughput of up to 15 t/h
- Consistently high cutting qualities thanks to readjustable blade blocks
- High power reserves for shredding even solid metals
- All blade blocks cut at an angle
- Easily replaceable wearing parts
- Hydraulic post-compacting unit
- therefore even light material can be shredded without any problems
- Rotor lined with wear tiles
- Reinforced housing and blade bar
- Defined output thanks to easily replaceable perforated sieve
- Granulate and flakes 10 - 100 mm
Technical specifications
| Type | ZMK1607 | ZMK2007 |
|---|---|---|
| Inlet opening | 1550x640mm | 1940x640mm |
| Blade cutting circle | 785mm | 785mm |
| Rotor speed | 250 rpm | 165 rpm |
| Number of blades | 48 rotor blades and 8 stator blades | 60 rotor blades and 10 stator blades |
| Drive power: | 250 kW | 315 kW |
| Hydraulic unit | 7.5 kW | 7.5 kW |
| Dimensions | 4260 x 3510 x 4140mm (LxWxH) | 4260 x 3900 x 4130mm (LxWxH) |
| Weight | approx. 26,5 t | approx. 30 t |
Areas of application
- Cable waste
- Household/commercial and industrial bulky waste
- Electrical and electronic waste
- Pre-shredded car & HGV tyres
- Aluminiumdrehspäne, Frässpäne
- Aluminium turning , milling chips
- Metal profiles
- Oil filters
- Steel and plastic drums (pre-shredded)
- Other plastics
- Paper etc.
Advantages
- High throughput of up to 15 t/h
- Consistently high cutting qualities thanks to readjustable blade blocks
- High power reserves for shredding even solid metals
- All blade blocks cut at an angle
- Easily replaceable wearing parts
- Hydraulic post-compacting unit
- therefore even light material can be shredded without any problems
- Rotor lined with wear tiles
- Reinforced housing and blade bar
Material fractions
- Defined output thanks to easily replaceable perforated sieve
- Granulate and flakes 10 - 100 mm
" For particularly heavy tasks, in extra-reinforced design. "
Granulator in reinforced design for extreme tasks...
Granulator for extreme tasks and high throughput.With its large rotor diameter, reinforced housing, extremely massive stator blade bars as well as a rotor lined with solid cast wear tiles, this granulator is up to almost any task.
Due to the enormous rotor mass, a high torque is generated when the rotor rotates, which can easily overcome high load peaks. Where other shredding machines reach their limits, this granulator comes into play.
Technische Spezifikationen
| Type | ZMK1607 | ZMK2007 |
|---|---|---|
| Inlet opening | 1550x640mm | 1940x640mm |
| Blade cutting circle | 785mm | 785mm |
| Rotor speed | 250 rpm | 165 rpm |
| Number of blades | 48 rotor blades and 8 stator blades | 60 rotor blades and 10 stator blades |
| Drive power: | 250 kW | 315 kW |
| Hydraulic unit | 7.5 kW | 7.5 kW |
| Dimensions | 4260 x 3510 x 4140mm (LxWxH) | 4260 x 3900 x 4130mm (LxWxH) |
| Weight | approx. 26,5 t | approx. 30 t |
Einsatzbereiche
xyz-ips snippet=”List-Einsatzbereiche”
Vorteile
- Hohe Durchsatzleistung
- Gleichbleibende hohe Schnittqualität dank nachjustierbarer Messerblöcke
- Extra große Schwungscheibe
- Hohe Stabilität und ruhiger Lauf infolge eines hohen Maschinengewichts Hydraulischer Nachdrückeinheit, daher selbst leichtes Material problemlos zerkleinerbar
- Leicht wechselbare Verschleißteile
Materialfraktionen
- Definierte Outputgröße durch einfach zu wechselnde Siebsegmente
- Granulat und Flakes 20 – 100 mm